Instructions for use:
First use:
1. Unscrew the device base counterclockwise.
2. Remove the base of the device, then remove the red tab from the insulator.
3. Put the device stand back into place, then screw clockwise until it is firmly attached.
4. Follow the instructions inside for regular use.
Regular use:
1. Remove the protective cover from the roller before use.
2. Check that the roller is pressed into the device. Do not use without fixing the roller.
3. Turn on the device by turning the grey metallic ring to the left, then gently roll the roller over the calluses and the dead skin will gradually disappear. For use on dried skin only. Do not press too hard, otherwise the device will stop.
4. Turn off and check if you have achieved the desired softness. Alternatively, turn on the device and repeat until you achieve the desired smoothness.
5. Turn off the device by turning the grey metallic ring to the right.
6. Wipe or rinse your feet (e.g. using the Velvety Smooth Relaxing Foot Bath) to remove the residue of dead skin that remains behind.
7. Dry your feet thoroughly. 8. Apply a moisturising cream and massage your feet to penetrate it.