- Shake the container well and pour the care product into a plastic bucket. It is important that no pigments are left in the container. Stir regularly during the application to prevent the pigments from settling to the bottom.
- Mix Oil Refreshing Soap with lukewarm water: – For traditionally oiled floors: 1:20 (250 ml soap into 5 L of water). – For UV-oiled and oil-waxed floors: 1:40 (125 ml soap into 5 L of water). The mixture ratio can vary depending on wear.
- Wipe the floor lengthwise with the care product. It is recommended to clean an area of 10 m² at a time .
- Leave the surface to dry for 2-3 hours at 20°C before use.
- If a light shine is wanted, polish the dry floor with a white pad.
For best results, use two buckets: one with soap water and the second with clean water to rinse the dirty mop. See technical data sheet for further information.
Use WOCA Wood Stain Remover or WOCA Intensive Wood Cleaner for particular stubborn stains before cleaning and maintaining with Oil Refreshing Soap.
Always remember to test on a less visible spot to check the compatibility of the surface with the product.