How to apply gold leaf
The steps for applying gold leaf are as follows:
Prepare materials: gold leaf, fine brush, gold leaf adhesive, and a bag.
Clean the surface: Wipe the surface to be gilded with a soft cloth to ensure that there is no dust or impurities.
Apply adhesive: Use a fine brush to evenly apply the gold leaf adhesive to the surface. Make sure the coating is even and not too thick, to avoid bubbles or dripping.
Wait for the adhesive to dry: Allow the adhesive to dry on the surface, which usually takes about 15 to 20 minutes.
Apply the gold leaf: Gently take the gold leaf out of the bag and carefully cover it on the dried surface. Use your fingers or a soft brush to gently press the gold leaf, ensuring that it adheres tightly to the surface.
Remove excess gold leaf: Use a dry fine brush to gently brush off any excess gold leaf. Be careful not to touch the already applied gold leaf.
Applying gold leaf requires patience and attention to detail, and practice will help you master the technique better.
