• Set of night vision equipment use on the Optic sight. You can use your scope in the complete darkness.And it comes with a 5-inch screen, which can transmit the sight of the scope to the screen through the viewfinder of the night vision goggles, so you don’t need to look at the scope eyepiece when hunting.

• 5W IR: The laser infrared illuminator can obtain a longer view at night and has a zoom function. Please turn on the infrared illuminator at night. (The infrared illuminator cannot be used alone, please use it with a night vision device)

• Recommendations for use in a completely dark environment (need to turn on the IR): The best effect is around 100 yards, and the picture quality around 200 yards starts to appear white spots, white bars and even blur

• Sleeve screw upgrade: adjustment and installation without tools, more convenient and faster

• If you have any questions about use or installation, you can contact us, we will provide 7X24 hours of service

1.Secure the display and IR light on the optical sight with the pipe clamp.

2.Loosen screws , and centrally fix the connecting tube in the rear of the eyepiece of the optical sight.

3.Turn on the machine and rotate the lens of the machine (inside the tube) to adjust the focus, and adjust the cross line of optical sight to be clear.

4.Adjust the position of the connecting tube, and tighten the screws till the cross line in the center of the display. And the commissioning of the machine is complete till now.

5.In the future application, if the image is blurred caused by the different distances of the objects, the image clarity shall be adjusted by side focus roller (and the parallax adjustment roller) attached with the optical sight. Do not move the machine lens, otherwise the cross line will be blurry.